
All Cement Tiles
The LiLi Solid Collection features a variety of shapes and sizes of cement tiles in a wide range of vibrant colors. This collection is perfect for adding a touch of color to a space that may not need an elaborate design. Alternatively, the tiles in this collection can be used as plain colored complements to their patterned counterparts. Each color code correlates with the codes used in the patterned tiles and can be matched accordingly.
Key Features
- Handmade
- Various sizes, all 1/2” thickness
- May be installed on walls and floors
- Residential & commercial use
- Suitable for both indoor & outdoor
- Suitable for wet and dry installations
- DCOF slip resistant
- Not for use in pools
Hydraulic pressed, handmade cement tiles with a color layer of 1/8" thickness adhered to body of the tile using 1800 PSI. Composed of Portland cement, marble dust, and mineral pigments.
Test Results:
Wet Dynamic Coefficient of Friction (DCOF) - ANSI A137.1 (2012) Section 9.6.1: 0.62
Water Absorption - TCVN 6355 (1998) Section 3: 9.7%
Breaking Bending Load - TCVN 6065 (1995) Section 5.6: 1.18 kN
Relative Resistance to Deep Abrasive Wear - ASTM C1243-93 (2009): 222.6 mm3
Sealing: Cement tiles must be sealed with a penetrating sealer to avoid any damage and/or staining
Freeze/Thaw Resistance: Untreated cement tiles are not resistant to freeze/thaw cycles and must be treated with a penetrating sealer
Acid Resistance: Cement tiles are not acid resistant and must be cleaned with pH neutral cleaners
Use in Wet Areas: Cement tiles can be used in almost all wet areas, except inside pools