Metal Insert Tiles

Overview Specifications

The LiLi Metal Insert Collection is one of the most unique lines of cement tiles in the industry. Each tile is crafted with a laser-cut solid metal insert, creating an eye-catching piece that adds a hint of shine and dimension to any wall or floor. The metals used include brass, copper, and aluminum. This line features a selection of both classic and modern designs in a variety of shapes and sizes. Each tile is made using a combination of natural cement, marble dust, and natural pigments for unparalleled quality with a luxurious feel.

Key Features

Handmade
Various sizes, all 1/2” thickness
May be installed on walls and floors
Residential & commercial use
Suitable for both indoor & outdoor
Suitable for wet and dry installations
DCOF slip resistant
Not for use in pools

Hydraulic pressed, handmade cement tiles with a color layer of 1/8" thickness adhered to body of the tile using 1800 PSI. Composed of Portland cement, marble dust, and mineral pigments.

Test Results:

Wet Dynamic Coefficient of Friction (DCOF) - ANSI A137.1 (2012) Section 9.6.1: 0.62

Water Absorption - TCVN 6355 (1998) Section 3: 9.7%

Breaking Bending Load - TCVN 6065 (1995) Section 5.6: 1.18 kN

Relative Resistance to Deep Abrasive Wear - ASTM C1243-93 (2009): 222.6 mm3

Sealing: Cement tiles must be sealed with a penetrating sealer to avoid any damage and/or staining.

Freeze/Thaw Resistance: Untreated cement tiles are not resistant to freeze/thaw cycles and must be treated with a penetrating sealer.

Acid Resistance: Cement tiles are not acid resistant and must be cleaned with pH neutral cleaners.

Use in Wet Areas: Cement tiles can be used in almost all wet areas, except inside pools.